NIGHT LIGHTS
| NLTD/2-MP |
Dusk-Till-Dawn,
White, (twin pack) |
10 |
| NLDD/2-MP |
Directional with rotating cover,Dusk-Till-Dawn,
White, (twin pack) |
10 |
| NLPT/2-MP |
Plug-through, Dusk-Till-Dawn,
White, (twin pack) |
10 |
| GL1/2-MP |
Glow light, White,
(twin pack) |
10 |
| DDLH-MP |
Dusk-Till-Dawn,
lamp holder adaptor |
5 |
| NLPIR/2-MP |
Motion detector LED night light |
10 |
| NLED/2-MP |
LED battery push light (twin pack) |
5 |
- Provides a soft background light
- All night lights fitted with LED bulbs, for low energy consumption, long life & no hot lamps
- Manufactured to BS1363 & BS EN 60598 and BS 5733 where applicable
LIGHTING ACCESSORIES
| SL4W1-MP |
4 watt battery strip light |
10 |
| CLIPLT-MP |
2A clip-on light with push bar lamp holder |
10 |
| FPSW/2-MP |
Finger plates, white
(twin pack) |
10 |
| RPL1-MP |
Round push light |
10 |
- Manufactured to BS EN61184 where applicable
BATTERY POWERED SMOKE ALARM
| SD361HS-MP |
DC operated photo-electric smoke alarm |
6 |
- Easy to install
- 85dB alarm
- Battery missing indicator
- Power operation indicator
- Low battery warning indicator
- Complies with BS5446 -1:2000
- Kitemarked
- Supplied with batteries
NON-LATCHING RCD SAFETY ADAPTOR
| ARCDKG-MS |
RCD safety adaptor |
4 |
- Maximum load 3120 watts 240V AC 30 milli-amp trip speed 40 milli-seconds
w(typical) double pole contact break
- Manufactured to BS 7071 1992
- Added protection against fatal electric shocks
There are two types of RCD’s: Active & Passive, also termed Latching & Non-latching.
Both types are accepted by British Standards and it is up to the user to choose the type of RCD that is most suitable for their application.
Active (Non-latching) - RCD’s switch off if power to them is turned off. Every time the appliance is turned off, the RCD will trip & have to be reset by going to the socket.
Passive (latching) - RCD’s “remember” what state they were in prior to the power
being switched off.
On the resumption of the power, the power will then continue
to be supplied to the appliance, & the RCD does not need to be reset.